Deutsch
English
français
español
русский
italiano
polski
português
Türkçe
中文
UniSampler with hose
- Suction hose PVC, 2.50 m long
- Complete in a handy transport case incl. sample bottle PP 1000 ml, vacuum pump, universal bottle adapter, hose weight made of AISI 304 (1.4301), 20 seal-it bottle seals
- Universal bottle adapter made of PVC, for bottle necks Ø 24 mm, 31 mm, 39 mm and 50 mm nominal dimension, for sample bottles 100–1000 ml
Packaging unit
Piece
Detailed information
UniSampler with PVC hose and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth.
Sampler for liquid samples from a precisely predetermined depth, with manual vacuum pump. Sampling using a vacuum pump has the advantage that the liquid only comes into contact with the suction hose and the original sample bottle.
Typical application area of the product
Sampler for liquid samples from a precisely predetermined depth, with manual vacuum pump.
How to use the product
- Lower the suction hose to the required depth.
- Attach the adapter to the sampling bottle.
- Create a vacuum using the handpump and collect the sample.
- Remove the filled sample bottle, close and label it.
- Transport case
- Sample bottle PP 1000 ml
- Suction hose PVC 2.50 m
- Vacuum pump
- Universal bottle adapter
- Hose weight made of V2A
- 20x seal-it label seals
Specifications
General material
PP
Polypropylene
General material
PVC
Polyvinyl chloride
General material
1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304
Connection
- For openings from:
- 24 mm
- For openings up to:
- 50 mm
- Connection type:
- Variable universal stopper
Limit values
- Viscosity up to:
- 500 mPa·s
Dimensions
- Length:
- 402 mm
- Width:
- 335 mm
- Height:
- 97 mm
Tubing length
- Hose length:
- 2.5 m
Contents of collection container
- Contents:
- 1000 ml
Vacuum sampler
- Sampling type:
- Target point sample
- Sample material:
- liquid
- Special features Vacuum sampler:
- Universal adapter/flexible sample container,Completely transportable in a case
Vacuum pump also available in aluminium on request.
Complementary products
Wide neck bottle PP
PP sampling bottle
Wide neck bottle PP
Wide neck bottle PP
Suction hose for replacement
Hose cutter
Edges cut with the hose cutter are always clean and flat, even in the case of thick hoses. For hoses to Ø 20 mm.
Similar products
Sampler for liquid samples UniSampler "Ex"
The sampler was specially developed for sampling flammable liquids of hazard class AI (VbF, e.g. petrol). The glass bottle and hose are electrically connected and are earthed via an earth cable.
UniSampler sampler with lance
ProfiSampler Aluminium
ProfiSampler aluminium for solvents and flammable liquids in Explosion Categories IIA, IIB and IIC. With bottle thread GL 45 (suitable for Schott glass bottles 100 ml to 1000 ml).
When taking samples of flammable liquids, the device must be earthed. For this, earthing cable and, possibly in addition, anti-static set should be used, see accessories.
Profi Sampler PP
ProfiSampler PP for general samples, for weak acids, alkalis, detergents, chemical baths. Made of solid, chemical resistant Polypopylene.
MiniSampler PE
PE MiniSampler for general sampling, max. suction height 5 m*
Ideal for general sampling from barrels, canisters, tanks etc.
MiniSampler PTFE
PTFE MiniSampler for ultra-pure sampling, max. suction height 5 m.
Ideal when maximum purity is needed.
