View in the flip catalogue
To all specifications

Packaging unit

Piece

Please note

Pay attention to the chemical resistance of the materials! See also List of chemical resistance

Detailed information

ProfiSampler PP for general samples, for weak acids, alkalis, detergents, chemical baths. Made of solid, chemical resistant Polypopylene.

While the MiniSampler is designed for laboratory use, the ProfiSampler has been specially developed for rough industrial use.

Vacuum samplers have the advantage that the sample liquid only comes into contact with the suction hose and the original sample bottle. The possibility of cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed. The disposable suction hose can quickly be replaced. This guarantees that the samples are always authentic. If necessary, a new hose can be used for every single sample.

Due to its small diameter (8 mm), the hose can reach narrow, seemingly inaccessible sampling areas.

Typical application area of the product

Sampling liquids in barrels, tanks, lorries, railway goods wagons, ships, water courses, ground water, etc.
5305-1000_profisampler_pp_gebrauchsanleitung.pdf 5305-1000_profisampler_pp_gebrauchsanleitung.pdf
  • Vacuum pump, made of solid PP, with feet, venting valve and bottle thread GL 40
  • PP bottle 250 ml
  • 10 m PE suction hose (roll)
  • Hose cutter
  • Stainless steel hose weight made of AISI 304 (1.4301)
  • 20x seal-it bottle seal

Specifications

General material

PP
Polypropylene

General material

PE
Polyethylene

General material

1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304

Further materials

FKM, FPM
Fluorine rubber

Thread

Thread:
GL 40
Version:
Internal thread

Tubing length

Hose length:
10 m

Contents of collection container

Contents:
250 ml

Limit values

Viscosity up to:
500 mPa·s
Intake height:
5 mWC

Vacuum sampler

Sampling type:
Target point sample
Sample material:
liquid
To the list of chemical resistance

The ProfiSampler can be extended with useful accessories developed in practice.

Complementary products

PP sampling bottle

PP sampling bottle

PE hose PE hose

PE hose

The PE hose is physiologically harmless, resistant to acids, alkalis, salts and a variety of solvents, pressure-resistant, flexible, impact-resistant, lightweight, pressure-resistant, deformation-resistant up to + 80°C.

Straight suction tubes for ProfiSampler

Straight suction tubes (PE or PA) have the advantage that they are not slightly bent as is the standard tubing (from the roll) and can therefore be immersed absolutely vertically into the container. The suction tubes are available in transparent PE for general sampling and black PA for flammable liquids in VbF Hazard Category AI (electrically conducting). Diameter 6 x 8 mm.

Contamination banned! In practice the low-priced tubes are only used once. They are then disposed of, instead of being subjected to a costly cleaning process. The tubes are not autoclavable.
Transport case for straight suction tubes

Transport case for straight suction tubes

Suction tube case for the practical transport of new suction tubes and the safe storage of used ones. Suitable for 100 suction tubes, 220 cm long.

Similar products

ProfiSampler Aluminium ProfiSampler Aluminium

ProfiSampler Aluminium

ProfiSampler aluminium for solvents and flammable liquids in Explosion Categories IIA, IIB and IIC. With bottle thread GL 45 (suitable for Schott glass bottles 100 ml to 1000 ml).

When taking samples of flammable liquids, the device must be earthed. For this, earthing cable and, possibly in addition, anti-static set should be used, see accessories.
Vampire sample collector Vampire sample collector

Vampire sample collector

The Vampire sampler makes it easy to collect liquids from great depths. The medium to be sampled is fed directly into the sample container via the closed tubing system. Impurities and contamination are eliminated.
Sampler for liquid samples UniSampler "Ex" Sampler for liquid samples UniSampler "Ex"

Sampler for liquid samples UniSampler "Ex"

The sampler was specially developed for sampling flammable liquids of hazard class AI (VbF, e.g. petrol). The glass bottle and hose are electrically connected and are earthed via an earth cable.
UniSampler sampler with lance UniSampler sampler with lance

UniSampler sampler with lance

The Bürkle UniSampler with lance is the ideal solution for precise, safe and flexible sampling of liquids in laboratories and industry. The sampler was developed to meet the highest standards of purity and user-friendliness.
UniSampler with hose UniSampler with hose

UniSampler with hose

UniSampler with PVC hose and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth.
MiniSampler PE MiniSampler PE

MiniSampler PE

PE MiniSampler for general sampling, max. suction height 5 m*

Ideal for general sampling from barrels, canisters, tanks etc.
MiniSampler PTFE MiniSampler PTFE

MiniSampler PTFE

PTFE MiniSampler for ultra-pure sampling, max. suction height 5 m.

Ideal when maximum purity is needed.