View in the flip catalogue
To all specifications

Packaging unit

Piece

Detailed information

PE MiniSampler for general sampling, max. suction height 5 m*

Ideal for general sampling from barrels, canisters, tanks etc.

With the vacuum sampler MiniSampler, the sample liquid only comes into contact with the suction hose and the original sample bottle. The possibility of cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed. The disposable suction hose can quickly be replaced. This guarantees that the samples are never contaminated. If necessary, a new hose can be used for every single sample.

Due to its small diameter (8 mm), the hose can reach narrow, seemingly inaccessible sampling areas.

Typical application area of the product

The MiniSampler sampling pump is ideal for sampling from deep or narrow sampling points.
How to use the product
  1. Insert the hose and the bottle into the pump.
  2. Insert hose end to desired sample depth.
  3. Move the pump piston back and forth and collect the sample. The liquid flows directly into the bottle.
  4. Take off the filled bottle, close and label it.
5305-0100_minisampler_pe_gebrauchsanleitung.pdf 5305-0100_minisampler_pe_gebrauchsanleitung.pdf
  • Transport case
  • Vacuum pump
  • 10x PE 100 ml bottles
  • 10 m PE suction hose 6 x 8 mm
  • Hose cutter
  • Stainless steel hose weight made of V2A (1.4301), nickel-plated brass
  • 20x seal-it label seals

Specifications

General material

PE
Polyethylene

General material

1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304

Further materials

PP
Polypropylene

Thread

Thread:
GL 32
Version:
Internal thread

Tubing length

Hose length:
10 m

Contents of collection container

Contents:
100 ml

Limit values

Viscosity up to:
500 mPa·s
Intake height:
5 mWC

Dimensions

Length:
402 mm
Width:
335 mm
Height:
97 mm

Vacuum sampler

Sampling type:
Target point sample
Sample material:
liquid,viscous/light viscosity
Special features Vacuum sampler:
Completely transportable in a case
To the list of chemical resistance

Complementary products

Narrow neck reagent bottles Narrow neck reagent bottles

Narrow neck reagent bottles

Narrow neck reagent bottles for storing, packaging, sampling or transporting liquids. Transparent HDPE allows the contents to be seen. Blue tamper evident PP screw cap ensures leak proof storage.
Narrow neck reagent bottles Narrow neck reagent bottles

Narrow neck reagent bottles

Narrow neck reagent bottles for storing, packaging, sampling or transporting liquids. Transparent HDPE allows the contents to be seen. Blue tamper evident PP screw cap ensures leak proof storage.
PE hose PE hose

PE hose

The PE hose is physiologically harmless, resistant to acids, alkalis, salts and a variety of solvents, pressure-resistant, flexible, impact-resistant, lightweight, pressure-resistant, deformation-resistant up to + 80°C.
Hose cutter Hose cutter

Hose cutter

Edges cut with the hose cutter are always clean and flat, even in the case of thick hoses. For hoses to Ø 20 mm.
MiniSampler adapter PTFE

MiniSampler adapter PTFE

MiniSampler pump with adapter PP

MiniSampler pump with adapter PP

MiniSampler standard pump

MiniSampler standard pump

Similar products

MiniSampler PTFE MiniSampler PTFE

MiniSampler PTFE

PTFE MiniSampler for ultra-pure sampling, max. suction height 5 m.

Ideal when maximum purity is needed.
UniSampler sampler with lance UniSampler sampler with lance

UniSampler sampler with lance

The Bürkle UniSampler with lance is the ideal solution for precise, safe and flexible sampling of liquids in laboratories and industry. The sampler was developed to meet the highest standards of purity and user-friendliness.
UniSampler with hose UniSampler with hose

UniSampler with hose

UniSampler with PVC hose and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth.
ProfiSampler Aluminium ProfiSampler Aluminium

ProfiSampler Aluminium

ProfiSampler aluminium for solvents and flammable liquids in Explosion Categories IIA, IIB and IIC. With bottle thread GL 45 (suitable for Schott glass bottles 100 ml to 1000 ml).

When taking samples of flammable liquids, the device must be earthed. For this, earthing cable and, possibly in addition, anti-static set should be used, see accessories.
Profi Sampler PP Profi Sampler PP

Profi Sampler PP

ProfiSampler PP for general samples, for weak acids, alkalis, detergents, chemical baths. Made of solid, chemical resistant Polypopylene.
Sampler for liquid samples UniSampler "Ex" Sampler for liquid samples UniSampler "Ex"

Sampler for liquid samples UniSampler "Ex"

The sampler was specially developed for sampling flammable liquids of hazard class AI (VbF, e.g. petrol). The glass bottle and hose are electrically connected and are earthed via an earth cable.
Vampire sample collector Vampire sample collector

Vampire sample collector

The Vampire sampler makes it easy to collect liquids from great depths. The medium to be sampled is fed directly into the sample container via the closed tubing system. Impurities and contamination are eliminated.