Please note

Please order the desired head as an accessory!

Detailed information

For sampling very small quantities of highly potent, expensive or active powders for analysis. The smallest sample quantities from 0.1 ml to 2.5 ml can be collected with the PharmaPicker. By simply exchanging the volume tip in the collection cylinder for 0.1–1.2 ml or 1.25–2.5 ml, the sampling volume is modified.

The PharmaPicker has a length of 60 cm and can be extended repeatedly by 50 cm or 100 cm, maximum length 3.50 m.

Typical application area of the product

PharmaPicker for sampling highly potent, expensive or active powders.

How to use the product

Insert the required volume tip into the collection cylinder.
Insert the PharmaPicker, the disc sleeve closes the collection cylinder automatically.
The disc sleeve opens the collection cylinder at the required point, and the desired sample is collected.
Withdraw the PharmaPicker completely.
Empty the sample directly from the collection cylinder into the analysis container.

PharmaPicker

You need

The following accessories are required to use the product

You need

Volume heads for PharmaPicker

Volume tips to insert into the PharmaPicker collection cylinder.

Sampling quantity 0.1 - 1.2 ml for collection cylinder 5346-1000, 1.25 - 2.5 ml for collection cylinder 5346-2000.

Necessary accessories

Complementary products

Extension rod PharmaPicker

The PharmaPicker pharma sampler can be extended to a length of 3.50 m with the extension rods.

Collection cylinder for volume heads PharmaPicker

The collection chamber is the sample intake cylinder of the PharmaPicker system. The corresponding volume tip is inserted into the front of this stainless steel chamber. When inserted into the powder, the tip fills up; as it is withdrawn, the sample volume remains in the collection chamber.
The collection chamber is available in two sizes, suited to the respective volume range of the tips. It features a smooth surface that can be cleaned without residue and sterilised. The collection chamber ensures that the collected powder sample is securely stored until it is analysed and enables rapid volume changes by simply exchanging the tips.

Similar products

Powder sampler Mini

The Mini powder sampler is a small volume stainless steel sampler. When the button is pressed, a sample rod is inserted into the sample material and withdrawn when the button is released. A fixed amount of sample is trapped in the sample notch of the rod and removed.

MicroSampler

The MicroSampler has especially been designed for the sampling of small quantities of powder.

Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.

The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.

StickProof

Sampler for powder in the pharma area, made of stainless steel AISI 316L, material 1.4404. The especially slender tip can be inserted easily and deeply in order to take the sample. The conical inlet of the tip allows the collection of either very small or larger quantities. StickProof is constructed in one piece without edges, grooves or crevices for perfect and easy cleaning. The sample can be filled directly into the sampling bag from the outlet end. Fasten the bag with a sturdy clamp.

PharmaSpoon

PharmaSpoon for taking samples of powdery substances, intermediate products and material in the pharmaceutical industry. Special materials with excellent surface qualities must be used for this to prevent cross-contamination. Our PharmaSpoon fulfils these requirements. Made of stainless steel AISI 316L (1.4404), surface highly polished by hand (not electro-polished!). The excellent surface properties of the PharmaSpoon provide significant advantages.

Mini ViscoSampler

Sampler for viscous substances such as pastes, mud, creams, oils. The sample is drawn in using the pump rod and directly conveyed to a sampling container. Easy cleaning for flawless sampling.