Tank and silo sampler SiloDrill Alu
Representative sampling of bulk materials from tanks and silos
- Large collection volume from different layers
- Spring-loaded inner tube prevents grains from jamming
- Also suitable for sampling non-flowing bulk solids
- Extendable up to 350 cm for sampling from depth










bk.product.packaging-unit.label
Piece
Detailed information
The SiloDrill Alu is very robust and offers the highest manufacturing quality at an attractive price. This makes the SiloDrill an economical solution for projects with a limited budget or for use in less aggressive environments.
The aluminum SiloDrill is lighter than the stainless steel SiloDrill, making it easier to handle and transport.
The SiloDrill is a sampler specifically designed for taking samples of bulk materials from silos or tanks.
When bulk materials are transported over long distances, vibration and movement during transport can cause segregation of material layers, making representative sampling difficult.
The SiloDrill takes an all-layer sample through multiple layers of the bulk material so that the quality, composition, or other relevant properties of the entire stored material can be analyzed.
The SiloDrill fits through openings as small as 90 mm in diameter, making it very versatile. A special mechanism makes it easy to open and close the sampling chamber by turning the rugged T-handle. The spring-loaded inner tube minimizes the risk of jamming coarse grains. Drilling paddles and a scraping edge also allow sampling of caked and non-flowing bulk materials.
bk.product.scope_of_application.tab_headline
The SiloDrill is used to check the quality and homogeneity of bulk materials, to detect contamination or spoilage in stored materials, to take samples for further analysis required to comply with legal regulations or industry standards, e.g. in agriculture for sampling grain, seed, fertilizer or animal feed, in the food industry for sampling powdered and granulated foods from storage silos, in the chemical industry for taking chemical samples from industrial silos.

bk.product.utilization.tab_headline
- Attach the handle to the rod.
- Place the collection chamber on the rod and secure it with the safety clip.
- Using the handle, drill the sampler clockwise into the medium to be sampled to the desired depth (sample chamber is closed).
- At the desired depth, turn the sampler counterclockwise (sample chamber opens).
- The sample chamber is filled after approx. five turns.
- Turn the sampler clockwise approx. two turns (sample chamber is closed).
- Pull the sampler by the handle out of the medium to be sampled.
- Remove the safety clip and remove the collection chamber.
- Empty the sample into a suitable collecting vessel.

Material
- Tank and silo sampler SiloDrill Alu
bk.product.specifications.title
bk.product.general_material.label
Al
Aluminum
bk.product.general_material.label
1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304
Sample chamber details
- Probenvolumen je Kammer:
- 400 ml
- Anzahl Sammelöffnungen:
- 1 itms
- Probenvolumen gesamt:
- 400 ml
Lance dimensions
- Rohr-Ø:
- 40 mm
- Einstechtiefe:
- 1500 mm
- Gesamtlänge:
- 1524 mm
- Außen-⌀:
- 90 mm
Collecting chamber dimensions
- Kammernlänge:
- 300 mm
- Beginn der Sammelkammer:
- 123 mm
- Kammernbreite:
- 32 mm
Sampling lances
- Probenahmeart:
- All-layer sample/cross-section sample
- Proben Körnung:
- powdery/fine-grained,medium-grained
- Proben Material:
- free-flowing,cohesive,compacting/fixing
- Spitze:
- pointed
With the SiloDrill extension rods, the SiloDrill can be extended by one meter up to a maximum of 350 cm. This sampling lance can therefore also be used to reach bulk material in deeper areas of the silo.
bk.product.optional_accessories.tab_title

SiloDrill extension V2A

Transport case, large
The large transport case is a plastic case with a foam insert. It features a sturdy carrying handle, snap closures, and pick-and-pluck foam on the inside. Thanks to its hard outer shell, sensitive equipment is protected from impacts during shipping or when carried in the field.
The case is light enough to be carried easily, yet offers plenty of space for equipment and necessary accessories (tubing, adapters, tools). With this transport case, your equipment stays organised, protected, and mobile – no loose accessories flying around, no accidental bumps to the devices.


Wide neck bottle LDPE


Wide neck bottle PP


Wide-neck jar, square, PVC
bk.product.similar_products.tab_title


Tank and silo sampler SiloDrill AISI 304


Silo sampler SiloPicker


Jumbo sampler zone sampler for larger volumes, all-layer


Jumbo sampler zone sampler for larger quantities, Multi


Spiralus zone collector

Sample drill for stalk material


Novartos Multi pharmaceutical zone sampler 2-compartment sampler

