View in the flip catalogue
To all specifications

Packaging unit

Piece

Detailed information

The powder sampler Mini is a small volume stainless steel sampler.
When the button is pressed, a sampling rod enters the sample material and retracts when the button is released. In this way a fixed amount of sample material is enclosed in the sampling notch of the rod and removed.

The sampler accurately collects sample volumes of 0.01 ml, 0.05 ml and 0.1 ml, depending on the version.
With an insertion depth of up to 300 mm, multiple target point samples can be taken at different depths.
The small volume powder sampler is manufactured from high quality stainless steel 1.4404/1.4571 (316L/316Ti).

Typical application area of the product

The Mini powder sampler is used for sampling powdered products from small containers, bags, drums or open vessels. It is primarily used in the pharmaceutical, medical products and biotechnology industries, e.g. for testing raw materials, active ingredients and excipients.
How to use the product
  1. Insert the powder sampler into the powder to be sampled to the desired depth.
  2. At the desired depth, extend the inner rod by pressing the button.
  3. Move the sampler gently up and down. This will fill the collection chamber with the powder to be sampled.
  4. Retract the inner rod.
  5. Pull the sampler out of the powder.
  6. Extend the inner rod and empty the sample into a suitable collection container.
  7. Clean the sampler.
  • Powder sampler Mini
  • Sample set close-it

Specifications

General material

1.4404 (316L)
Stainless steel 1.4404, AISI 316L

Further materials

1.4571
Stainless steel 1.4571, AISI 316Ti

Sample chamber details

Sample volume per chamber:
0.05 ml
Chamber length:
30 mm
Number of collection openings:
1 itms

Lance dimensions

Pipe Ø:
6 mm
Plunge depth:
300 mm
Total length:
430 mm
Outer Ø:
30 mm

Sampling lances

Sampling type:
Target point sample
Grain size samples:
powdery/fine-grained
Sample material:
free-flowing
Special properties Sample lances:
Removable tip
Top:
rounded
To the list of chemical resistance

Complementary products

Control seal close-it 95x95 Control seal close-it 95x95

Control seal close-it 95x95

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.
Control seal close-it maxi 150x150 Control seal close-it maxi 150x150

Control seal close-it maxi 150x150

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.
Closure seal close-it food & pharma 95x95 Closure seal close-it food & pharma 95x95

Closure seal close-it food & pharma 95x95

In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the adhesive is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.

The adhesive complies with European food directives. Like the original, close-it food & pharma has an aluminium foil barrier layer. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.
Closure seal close-it food & pharma Maxi 150x150 Closure seal close-it food & pharma Maxi 150x150

Closure seal close-it food & pharma Maxi 150x150

In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the adhesive is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.

The adhesive complies with European food directives. Like the original, close-it food & pharma has an aluminium foil barrier layer. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.
Sampling bag SteriBag Sampling bag SteriBag

Sampling bag SteriBag

The bags are made of polyethylene and are therefore exceptionally tearproof and leakproof.

The SteriBag sampling bag is distinguished by its safe handling. When used according to instructions, samples are guaranteed sterile.

Integrated safety: The tab-ends are sealed in plastic film to prevent skin injuries.
Sample container Pure Sample container Pure

Sample container Pure

The handy, all-purpose sample jar is easy to fill, with smooth walls and no undercuts, so it can be emptied completely. It is an excellent universal container for all liquid and solid contents.

The attached lid can be opened with one hand and fixed at a 90° angle. This leaves the other hand free to take samples.

Liquid/condensate in the lid runs into a drip channel integrated into the lid, nothing is lost, nothing can drip out.

The sample boxes are closed while hot during production. This process ensures that the sample boxes are absolutely tight, as the lid and box adapt to each other during the cooling process.

The PP sample container is highly transparent and the contents are clearly visible.

The lightweight and unbreakable PP tube is resistant to high temperatures and chemicals. It is autoclavable, freezer safe and food safe.
Laboratory bottle PET sterile Laboratory bottle PET sterile

Laboratory bottle PET sterile

Sterile PET laboratory bottle designed for laboratory storage and packaging needs. Crystal clear PET provides a clear view of the contents. Raised graduation for accurate measuring and dispensing. Space saving and totally leak proof with tamper evident closure.

Similar products

MicroSampler powder sampler for samples 0.2 - 1.0 ml MicroSampler powder sampler for samples 0.2 - 1.0 ml

MicroSampler powder sampler for samples 0.2 - 1.0 ml

The MicroSampler has especially been designed for the sampling of small quantities of powder.

Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.

The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.
MicroSampler powder sampler for samples 2.0 - 10 ml MicroSampler powder sampler for samples 2.0 - 10 ml

MicroSampler powder sampler for samples 2.0 - 10 ml

The MicroSampler has especially been designed for the sampling of small quantities of powder.

Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.

The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.
Novartos Multi pharmaceutical zone sampler 2-compartment sampler Novartos Multi pharmaceutical zone sampler 2-compartment sampler

Novartos Multi pharmaceutical zone sampler 2-compartment sampler

The Novartos Multi double sampler allows a double multi-point sample to be taken from several pre-defined sampling zones. Depending on the length, four, seven or nine sampling chambers are equipped with two sample inserts (accessories) each.
Novartos Uno pharmaceutical zone sampler 2-compartment sampler Novartos Uno pharmaceutical zone sampler 2-compartment sampler

Novartos Uno pharmaceutical zone sampler 2-compartment sampler

With the Novartos Uno 2-compartment sampler, a double target point sample can be taken from a predefined sampling area. A collection chamber is equipped with two sample inserts (accessories) for the double sampler.
PharmaPicker for samples 0.1 - 1.2 ml PharmaPicker for samples 0.1 - 1.2 ml

PharmaPicker for samples 0.1 - 1.2 ml

For sampling very small quantities of highly potent, expensive or active powders for analysis. The smallest sample quantities from 0.1 ml to 2.5 ml can be collected with the PharmaPicker. By simply exchanging the volume tip in the collection cylinder for 0.1–1.2 ml or 1.25–2.5 ml, the sampling volume is modified.

The PharmaPicker has a length of 60 cm and can be extended repeatedly by 50 cm or 100 cm, maximum length 3.50 m.
PharmaPicker for samples 1.25 - 2.5 ml PharmaPicker for samples 1.25 - 2.5 ml

PharmaPicker for samples 1.25 - 2.5 ml

For sampling very small quantities of highly potent, expensive or active powders for analysis. The smallest sample quantities from 0.1 ml to 2.5 ml can be collected with the PharmaPicker. By simply exchanging the volume tip in the collection cylinder for 0.1–1.2 ml or 1.25–2.5 ml, the sampling volume is modified.

The PharmaPicker has a length of 60 cm and can be extended repeatedly by 50 cm or 100 cm, maximum length 3.50 m.
StickProof StickProof

StickProof

Sampler for powder in the pharma area, made of stainless steel AISI 316L, material 1.4404. The especially slender tip can be inserted easily and deeply in order to take the sample. The conical inlet of the tip allows the collection of either very small or larger quantities. StickProof is constructed in one piece without edges, grooves or crevices for perfect and easy cleaning. The sample can be filled directly into the sampling bag from the outlet end. Fasten the bag with a sturdy clamp.
PharmaSpoon PharmaSpoon

PharmaSpoon

PharmaSpoon for taking samples of powdery substances, intermediate products and material in the pharmaceutical industry. Special materials with excellent surface qualities must be used for this to prevent cross-contamination. Our PharmaSpoon fulfils these requirements. Made of stainless steel AISI 316L (1.4404), surface highly polished by hand (not electro-polished!). The excellent surface properties of the PharmaSpoon provide significant advantages.