View in the flip catalogue
To all specifications

Packaging unit

Piece

Please note

Please order the desired inserts as accessories!

Detailed information

The Novartos Multi 2-compartment double sampler allows a double multi-point sample to be taken from several pre-defined sampling zones. Depending on the length, four, seven or nine sampling chambers are equipped with two sample inserts (accessories) each.

Novartos pharmaceutical samplers can be used to take multiple unit-dose samples from one or more sampling points in a single sampling run.

Thanks to the intelligent design of these pharmaceutical samplers, it is not necessary to pierce the sample material several times for a multiple sample, thus largely avoiding segregation of the sample material. This is a particularly important requirement when taking very small quantities in the pharmaceutical industry.

With the Novartos sampler, a large number of samples can be taken quickly and easily, even from the same location, allowing representative retained samples to be taken.

The immersion depth of the sample lance is easy to read off the laser engraved depth scale. The rounded tip prevents scratching of the container. Two additional handles ensure safe insertion, fixation and rotation in the material. The precisely fitting inserts prevent mixing of materials and allow easy disassembly for thorough cleaning.

The electro-polished, grooveless surface of the pharmaceutical sampler and the high quality finish mean that there are no gaps for sample residue to collect in, which is also a key benefit for easy cleaning.

Typical application area of the product

The Novartos pharma sampler is a highly specialised sampler used primarily in the pharmaceutical industry to meet the strict requirements of FDA guidelines for unit dose sampling. However, the application is not limited to the pharmaceutical sector, but can also be used in the chemical industry, food and beverage industry, biotechnology, wherever the smallest quantities of powders need to be sampled in a representative way.
How to use the product
  1. With "1", move the sampler to the "CLOSE" position. The sampler is closed and can be inserted into the powder/granulate.
  2. Insert the sampler into the powder/granulate to the desired depth (the scale indicates the depth in cm).
  3. Move the sampler to the "OPEN" position at "1". The sampler is now open and is filled with sample.
  4. Move the sampler at "1" to the "CLOSE" position. The sampler is closed and the powder/granulate can be removed.
  5. If a second sample is to be taken, move the sampler to the "CLOSE" position at "2".
  6. Move the sampler at "2" to the "OPEN" position. The sampler is open and is filled with the second sample.
  7. Move the sampler at "2" to the "CLOSE" position. The sampler is closed and the powder/granulate can be removed.
  8. Open the sampler and empty the sample onto an appropriately prepared surface or into a suitable collecting container.
5358-xx0x_novartos_multi_zweifach_probenzug_gebrauchsanleitung.pdf 5358-xx0x_novartos_multi_zweifach_probenzug_gebrauchsanleitung.pdf
  • Sampling lance Novartos Multi 2-compartment sampler

Specifications

General material

1.4404 (316L)
Stainless steel 1.4404, AISI 316L

General material

1.4571
Stainless steel 1.4571, AISI 316Ti

Sample chamber details

Number of collection openings:
7 itms
Maximum coverage:
14 itms

Lance dimensions

Pipe Ø:
25 mm
Plunge depth:
1000 mm
Total length:
1200 mm

Collecting chamber dimensions

Chamber length:
30 mm
Start of the collecting chamber:
55 mm
Chamber width:
13 mm
Distance between the chambers:
100 mm

Sampling lances

Sampling type:
Multi point sampling
To the list of chemical resistance

You need

The following accessories are required to use the product

You need

Novartos Multi sample inserts

Novartos Multi sample inserts are accurately fitting, easily interchangeable sample inserts for the Novartos Multi pharmaceutical sampler. Different volumes can be selected and combined. The blank insert (0.0 ml) can be used to prevent sampling at a specific point.
Necessary accessories

The Novartos Multi sampler offers a wide range of sample volumes; different inserts with sample volumes from 0 to 2.0 ml can be selected and combined.

Blind inserts (0.0 ml) can be used to prevent a sample from being taken at a specific point.

Complementary products

Novartos tip (not rounded)

Novartos tip (not rounded)

The non-rounded tip for Novartos can be replaced on the sampling lance. The very pointed and stable tip can be used to pierce directly into bags or other containers.
Transport case, large

Transport case, large

Quali-Paper for zone collectors Quali-Paper for zone collectors

Quali-Paper for zone collectors

The sample paper is lint and fibre free, ensuring a clean and reliable base without distorting the sample.

Similar products

Novartos Multi pharmaceutical zone sampler 3-compartment sampler Novartos Multi pharmaceutical zone sampler 3-compartment sampler

Novartos Multi pharmaceutical zone sampler 3-compartment sampler

The Novartos Multi 3-compartment sampler takes a triple multipoint sample from several pre-defined sampling zones. Depending on the length, four, seven or nine collection chambers are equipped with three sample inserts (accessories) each for the triple sampler.
Novartos Uno pharmaceutical zone sampler 2-compartment sampler Novartos Uno pharmaceutical zone sampler 2-compartment sampler

Novartos Uno pharmaceutical zone sampler 2-compartment sampler

With the Novartos Uno 2-compartment sampler, a double target point sample can be taken from a predefined sampling area. A collection chamber is equipped with two sample inserts (accessories) for the double sampler.
Novartos Uno pharmaceutical zone sampler 3-compartment sampler Novartos Uno pharmaceutical zone sampler 3-compartment sampler

Novartos Uno pharmaceutical zone sampler 3-compartment sampler

The Novartos Uno triple sampler takes a triple target point sample from a predefined sampling area. For the triple sampler, a collection chamber is equipped with three sample inserts (accessories).
Powder sampler Mini Powder sampler Mini

Powder sampler Mini

The Mini powder sampler is a small volume stainless steel sampler. When the button is pressed, a sample rod is inserted into the sample material and withdrawn when the button is released. A fixed amount of sample is trapped in the sample notch of the rod and removed.
MicroSampler powder sampler for samples 0.2 - 1.0 ml MicroSampler powder sampler for samples 0.2 - 1.0 ml

MicroSampler powder sampler for samples 0.2 - 1.0 ml

The MicroSampler has especially been designed for the sampling of small quantities of powder.

Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.

The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.
MicroSampler powder sampler for samples 2.0 - 10 ml MicroSampler powder sampler for samples 2.0 - 10 ml

MicroSampler powder sampler for samples 2.0 - 10 ml

The MicroSampler has especially been designed for the sampling of small quantities of powder.

Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.

The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.
PharmaPicker for samples 0.1 - 1.2 ml PharmaPicker for samples 0.1 - 1.2 ml

PharmaPicker for samples 0.1 - 1.2 ml

For sampling very small quantities of highly potent, expensive or active powders for analysis. The smallest sample quantities from 0.1 ml to 2.5 ml can be collected with the PharmaPicker. By simply exchanging the volume tip in the collection cylinder for 0.1–1.2 ml or 1.25–2.5 ml, the sampling volume is modified.

The PharmaPicker has a length of 60 cm and can be extended repeatedly by 50 cm or 100 cm, maximum length 3.50 m.
PharmaPicker for samples 1.25 - 2.5 ml PharmaPicker for samples 1.25 - 2.5 ml

PharmaPicker for samples 1.25 - 2.5 ml

For sampling very small quantities of highly potent, expensive or active powders for analysis. The smallest sample quantities from 0.1 ml to 2.5 ml can be collected with the PharmaPicker. By simply exchanging the volume tip in the collection cylinder for 0.1–1.2 ml or 1.25–2.5 ml, the sampling volume is modified.

The PharmaPicker has a length of 60 cm and can be extended repeatedly by 50 cm or 100 cm, maximum length 3.50 m.