To all specifications

Detailed information

The multi-sampler with separate sampling chambers is a dedicated sampler for simultaneous sampling of multiple target points from different zones or layers of a wide variety of bulk solids.

The zone sampler allows differentiated and representative sampling from different depths or areas within a bag, drum, silo, big bag or heap. The multi-zone sampler is particularly useful in situations where the composition of the material varies with depth or across the surface and a single sample is not sufficient to accurately characterise the entire material.

The target point samples can be analysed individually after collection to investigate variability within a material or between different layers of material, or they can be subsequently mixed to produce a composite sample that is representative of the entire material. This method ensures that the final sample is representative, i.e. reflects the average composition of the material, which is essential for correct analysis and quality control.

The lances can be used both vertically and horizontally, making the sampler a very versatile sampler for different containers.

The design with minimal gap between the inner and outer tube reduces the risk of contamination and increases the accuracy of sampling. The removable tip also facilitates cleaning to effectively prevent cross-contamination between different samples.

Colour-coded caps facilitate identification and prevent confusion when using multiple samplers for different bulk solids.

The robust design of the multi-sampler ensures a long service life, even with regular use. The high quality workmanship ensures reliability and precision with every sample taken.

Typical application area of the product

The multi-sampler is used where it is necessary to take samples from several zones or layers simultaneously in order to obtain a comprehensive analysis of the composition, quality, impurities or inconsistencies of a material. For example, in the food industry to check the homogeneity and quality of bulk materials such as grain, corn, nuts, powders or granules; in the pharmaceutical industry for quality control of raw materials, intermediate and finished products; in the chemical industry to analyse chemicals, powders to ensure homogeneity of mixture and compliance with specifications; in the construction industry, materials science, research and development to test bulk materials such as sand, gravel and other materials.
How to use the product
  1. Turn the handle of the multi-collector clockwise, the multi-collector is now closed and can be pierced into the powder/granulate.
  2. At the desired depth, turn the handle of the collector counter-clockwise.
  3. This opens the collection chambers and fills them with sample.
  4. Turn the handle clockwise to close the collector and remove it from the powder/granulate.
  5. Open the multi-collector and empty the sample onto a suitable surface or use an emptying device (see accessories).

Complementary products

Control seal close-it 95x95

Control seal close-it 95x95

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.
Emptying device

Emptying device

Convenient emptying rack made of 304 stainless steel for multi-collectors. Saves time, prevents contamination and sample loss. Simply place the multi-collector on the rack, place sample containers under the funnels and open the chambers - done.
Quali-Paper for zone collectors

Quali-Paper for zone collectors

The sample paper is lint and fibre free, ensuring a clean and reliable base without distorting the sample.
Sealing sleeves for zone samplers

Sealing sleeves for zone samplers

Sealing sleeves for zone samplers provide a reliable means of sealing individual chambers during filling, emptying or transport. In the case of a multi-collector, for example, each chamber can be emptied individually after sampling.
Cleaning brushes

Cleaning brushes

Cleaning brushes provide effective and thorough cleaning in a variety of areas. Made from high quality stainless steel and fitted with durable bristles, they effortlessly remove dirt, debris and contaminants from surfaces.

Similar products

All-layer sampler

The all-layer sampler with open inner tube is the ideal sampler for taking all-layer or mixed samples from all types of bulk materials, from the finest powders to larger grains.
This zone sampler ensures representative sampling through all layers or zones of the sample material.

Obtaining a homogeneous and representative all-layer composite sample from heterogeneous material is critical, especially when the composition varies within the bin, silo or pile. The all-layer zone sampler ensures that the sample taken reflects the overall composition of the material, which is essential for analysis and quality control.

The lances can be used both vertically and horizontally, making it a very versatile sampler for different types of containers.

The open inner tube, with no separate chambers, allows sampling across the entire volume of the sampler, providing a generous collection volume for more detailed analysis of bulk materials.

The design with minimal gap between the inner and outer tube reduces the risk of contamination and increases sampling accuracy. The removable tip also facilitates cleaning and effectively prevents cross-contamination between different samples.

Thanks to its robust design, the all-layer sampler promises a long service life, even with regular use. The high quality workmanship ensures reliability and precision with every sample.
Uno sampler target point collector

Uno sampler target point collector

The Uno sampler with single collection chamber is designed to take a target point sample from bulk material. After sampling, the target point sample can be analysed individually or multiple target point samples can be taken and a composite sample prepared.
Jumbo sampler Zone sampler for larger quantities

Jumbo sampler Zone sampler for larger quantities

The Jumbo zone sampler is used for sampling through all layers, particularly of coarse-grained bulk materials. The long sampling lances with 50 mm tube diameter and the extra large chamber volume allow large quantities of samples to be taken with large grain sizes.

This zone sampler ensures representative sampling through all layers or zones of the sample material and is essential for accurate analysis and quality control in various industries.

With lances that can be used both vertically and horizontally, this sampler offers maximum flexibility when sampling from different types of bins, silos or piles.