Packaging unit

Piece

Detailed information

LiquiSampler for liquids, according to DIN EN ISO 15528. Made of ultra pure and chemically inert PTFE/FEP or PP for contamination-free sampling.

Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with opening of at least 32 mm in diameter.

Easy cleaning - all surfaces are free of pores and crevices, preventing accumulation of dirt. Only round screw threads proven in foodstuffs hygiene are used. Disassembly and cleaning are extremely simple.

Typical application area of the product

Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with opening of at least 32 mm in diameter.

How to use the product
All-layer sample
  1. Slowly insert the LiquiSampler into the liquid with the button pressed.
  2. Release the push-button, the valve closes.
  3. Withdraw the lance and take out the sample.
Point sampling/bottom sample
  1. Insert the LiquiSampler to the targeted point/to the ground with closed valve.
  2. Press the button - the liquid flows in.
  3. Release the push-button, the valve closes.
  4. Pull out the LiquiSampler, take out the sample.
  • LiquiSampler PP

Specifications

General material

PP
Polypropylene

Dimensions

Immersion depth max.:
60 cm
Pipe Ø:
25 mm
Total length:
738 mm

Sample quantity

Sample quantity:
150 ml

Nozzle/tip

Outer Ø:
32 mm
Opening Ø:
17 mm
To the list of chemical resistance

Similar products

Dip Sampler, plunging siphon

Dip Sampler, plunging siphon

Dip sampler for simple removal of liquid samples. Good view due to transparent tubes. Upper end with reflux valve, lower end with ball valve.

Disposable plunging siphon

Disposable plunging siphon

If strongly adhesive liquids are sampled, it can be a lot less expensive to dispose of the sampler than to carry out a complicated cleaning process.

The disposable dip sampler were developed especially for this purpose. They are made of PE, transparent and the contents are easily visible. PE provides a surface that resists adhesion of the sample material, minimising sample retention on the dip sampler.

Mini ViscoSampler Mini ViscoSampler

Mini ViscoSampler

Sampler for viscous substances such as pastes, mud, creams, oils. The sample is drawn in using the pump rod and directly conveyed to a sampling container. Easy cleaning for flawless sampling.

ViscoSampler ViscoSampler

ViscoSampler

ViscoSampler with powerful suction for viscous media. The media is drawn up and discharged using the suction flask. Made of ultra-pure, chemically inert PTFE/FEP for contamination-free sampling.

Easy cleaning - all surfaces are poreless and without crevices. Dirt accumulation is prevented. Only round screw threads tried and tested in the field of food hygiene are used. Disassembly and cleaning are extremely simple.

QualiSampler set

QualiSampler set

The handy set, which comes complete with carrying case, combines the LiquiSampler and the ViscoSampler with practical accessories.

Models in PP or PTFE/FEP.

Sampler Liquid CupSampler Sampler Liquid CupSampler

Sampler Liquid CupSampler

It is possible to carry out point sampling of liquids of varying viscosity with the stainless steel AISI 316L (1.4404) Liquid CupSampler. Media-containing particles can also be sampled without difficulty.

The sampler can be used in the fields of chemistry, foodstuffs and cosmetics.

The cup can be unscrewed from the stem, allowing easy cleaning.

ChemoSampler ChemoSampler

ChemoSampler

The samples are drawn directly into the screw-on original sampling bottle. The tamperproof bottle closure of these bottles with original safety ring ensures unadulterated sample transport. Samples can be taken from depths of as much as 200 cm, e.g. from tanks, silos or tankers, by using the extension rod.

LiquiSampler PTFE/FEP LiquiSampler PTFE/FEP

LiquiSampler PTFE/FEP

LiquiSampler for liquids, according to DIN EN ISO 15528. Made of ultra pure and chemically inert PTFE/FEP or PP for contamination-free sampling.

Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with opening of at least 32 mm in diameter.

Easy cleaning - all surfaces are free of pores and crevices, preventing accumulation of dirt. Only round screw threads proven in foodstuffs hygiene are used. Disassembly and cleaning are extremely simple.