Deutsch
français
español
русский
italiano
日本語
Ελληνικά
polski
português
português (Brasil)
Türkçe
中文
한국어
Nederlands
svenska
norsk bokmål
Compact spigot
- Space-saving design
- Optimised discharge for even flow
- With connecting union nut for vertical position of the stop cock
- Tight-closing for complete seal
Packaging unit
Piece
Detailed information
The spigot Compact for canisters and barrels captivates everyone through its compact build, which makes the valve on the canister ideal for use in refrigerators and on racks, etc. The short discharge does not protrude out over the lower edge of the container, which makes the valve a perfect choice even when space is very limited.
The discharge's specially optimised design creates an even stream of liquid with no splashing or spattering.
The spigot features easy motion and a tight seal. It is screwed on with a connecting cap nut. This guarantees a vertical position of the valve and makes it possible to adjust the valve later on.
PP, PE and PTFE are materials that offer outstanding chemical resistance to acids and alkalis.
Typical application area of the product
The Compact spigot fits all containers with G 3/4" connecting threads.
- Compact spigot
Specifications
General material
PP
Polypropylene
Further materials
PTFE
Polytetrafluoroethylene
Further materials
PE-LD
Low-density polyethylene (LDPE)
Connection
- Connection type:
- Thread
- Thread:
- G 3/4 Zoll
- Version:
- Cap nut
Colouring
- Colour:
- blue
Spigot outlet
- Outer outlet Ø:
- 13 mm
- Outlet type:
- Outlet
Dimensions
- Length:
- 64 mm
- Width:
- 52 mm
- Height:
- 69 mm
Type of spigot
- Design of the stopcock:
- plug valve
- Flow rate:
- low flow rate
- Special features:
- Tap can be freely positioned
The Compact spigot is the ideal addition to the compact jerrycans – for perfect storage and filling when space is at a premium!
Complementary products
Container connection, grey
Container connector with outer thread, complete with EPDM seals, for easy mounting of thread in the sides of containers.
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Similar products
StopCock angled
The swivelling spout angle prevents dripping. The reduced spout allows the water to flow into narrow openings.
Ball valve PP
Ball valve PP fits all containers with G 3/4" connection thread. It can be attached to nearly all containers with thread adapters. Robust industrial quality, large flow.
StopCock PA, electroconductive
Commercially available spigots made of the materials polyethylene or polypropylene cannot be used for solvents.
StopCock PA fits onto 3/4" outer threads and with the supplied adapter onto 3/4" inner threads and therefore onto nearly all commercially available canisters and barrels where the discharge thread is at the bottom.
The StopCock discharge cocks fit all containers with G 3/4" connection threads. Thread adapters facilitate connection of cocks to nearly all containers.
StopCock straight-through
The StopCock discharge cocks fit all containers with G 3/4" connection threads. Thread adapters facilitate connection of cocks to nearly all containers.
Ball valves PP for barrels
Ball valves for barrels made of PP for barrels with thread connections.
Spigot "Air"
No additional ventilation opening required, PE, transparent, 3/4" thread connection outside.
Spigot "Brass"
Barrel tap for petrochemical liquids, closed independently when not used (increased safety), thread connection 3/4" on the outside.
Stainless steel spigot
Very sturdy and robust spigot made of stainless steel AISI 304 (1.4301). The outlet of the spigot turns 360° so it can be adjusted to any required position. With a practical suspension device for filling container and eyelet for shutting off the spigot.