Deutsch
français
español
русский
italiano
日本語
Ελληνικά
polski
português
Türkçe
中文
Ball valve PP
- Suitable for crystallising media
- Max. 4 bar pressure at 20 °C
- With connecting cap nut, guaranteed vertical position of the valve
- Incl. discharge angle
- Hose nozzle 16 mm Ø
- Nominal width 11 mm Ø
Packaging unit
Piece
Detailed information
Ball valve PP fits all containers with G 3/4" connection thread. It can be attached to nearly all containers with thread adapters. Robust industrial quality, large flow.
- Ball valve PP
Specifications
General material
PP
Polypropylene
Further materials
PE-LD
Low-density polyethylene (LDPE)
Further materials
PVC
Polyvinyl chloride
Connection
- Connection type:
- Thread
- Thread:
- G 3/4 Zoll
- Version:
- Cap nut
Colouring
- Colour:
- black/red
Spigot outlet
- Outer outlet Ø:
- 16 mm
- Outlet type:
- Angle discharge with spout
Nominal Ø
- Nominal diameter:
- 11 mm
Operating pressure (at +20 °C)
- Pressure max.:
- 4 bar
Dimensions
- Length:
- 161 mm
- Width:
- 80 mm
- Height:
- 106 mm
Type of spigot
- Design of the stopcock:
- Ball valve
- Flow rate:
- low flow rate
- Special features:
- Tap can be freely positioned,Extensive accessories
Complementary products
Container connection, grey
Container connector with outer thread, complete with EPDM seals, for easy mounting of thread in the sides of containers.
Thread sealing tape PTFE
Hose nozzles
The StopCock hose nozzles are special outlet fittings that can be screwed onto the Bürkle StopCock drain tap. They allow a hose to be connected directly to the tap in order to guide liquids precisely into containers positioned further away. The hose nozzles are available in various nominal sizes to match the corresponding internal hose diameters. They are chemically resistant and dimensionally stable. Assembly is done using a union nut on the ¾″ external thread of the StopCock. A dispensing hose can then be securely attached. With the hose nozzles, liquid flows directly and without dripping losses from the drum tap into, for example, bottles, jerrycans or over longer distances.
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Adapter 3/4" LaboPlast
StopCock spigots, ball valves and other accessories can be connected to most commercially available containers, with the LaboPlast® thread adapters.
All adapters have a standard outer thread G 3/4".
Adapter set thread adapter PP
Thread adapter set consisting of:
- Adapter PP outside/inside, S 56x4 (Tri-Sure) - G 2"
- Adapter PP outside/inside, S 70x6 (Mauser) - G 2"
- Adapter PP inside/inside, S 61x6 (DIN 61) - G 2"
- Adapter PP inside/inside, S 71x6 (DIN71) - G 2"
Similar products
Ball valves PP for barrels
Ball valves for barrels made of PP for barrels with thread connections.
Ball valve PP, white, male thread
Ball valve made of PP with external thread, glass fibre reinforced, ball made of PP, handle with O-ring made of food-safe NBR and seal made of EPDM.
Ball valve PP, food
Ball valve made of PP with outer / inner thread, fibre-glass reinforced, ball made of PP, handle with O-ring made of food-safe NBR and seal made of HDPE.
StopCock angled
The swivelling spout angle prevents dripping. The reduced spout allows the water to flow into narrow openings.