bk.product.specification-anchor-link.label

bk.product.packaging-unit.label

Piece

Detailed information

The Vampire sampler makes it easy to collect liquids from greater depths.

The portable sample pump consists of a self-contained drive unit, a pump head and a delivery tube. The medium to be sampled is pumped directly into the sample container through the closed tubing system. The sample only comes into contact with the tubing and the sample bottle. This eliminates the risk of impurities and contamination because the tubing is easy to clean and replace if necessary.

The self-priming peristaltic pump is also suitable for contaminated or particulate substances with a viscosity of max. 500 mPas. The sample is not altered by the gentle pumping action. With a suction depth of 5 meters, the battery-operated Vampir sampler can easily pump from deeper sampling points such as barrels, tanks, wells, water separators, wastewater and sewage treatment plants.

The portable sampler is convenient and easy to transport. The pump attachment is simply attached to the drive unit and the tubes can be changed quickly. The sample bottle is attached directly to the sampler via a bottle basket.

bk.product.scope_of_application.tab_headline

The peristaltic pump is ideal for sampling liquids in industrial process control in the chemical, pharmaceutical and food industries, where it is important to take samples from drums, tanks or other containers to ensure compliance with quality and safety standards, in environmental and water analysis for taking water samples from wells, streams, aquifers and other water sources to check water quality and for environmental studies, in wastewater and sewage treatment plants for monitoring and analyzing wastewater samples directly from sewage treatment plants, sewers, retention basins or water separators.
bk.product.utilization.tab_headline
  1. Insert the pump hose into the pump head.
  2. Cut the suction hose to the required length and attach it to the pump hose using the hose connector.
  3. Secure the bottle cage with the clamping device.
  4. Place the sample bottle in the bottle cage.
  5. Insert the pump tube approx. 1 - 3 cm into the sample bottle.
  6. Insert the pump attachment into the holder of the drive unit.
  7. Set the speed selector to 1 (low speed range).
  8. Immerse the suction tube in the sample liquid.
  9. Press the on/off switch to take the sample.
  10. Release the on/off switch to end sampling.
5327-1000_vampir_probensammler_gebrauchsanleitung.pdf 5327-1000_vampir_probensammler_gebrauchsanleitung.pdf
  • Drive unit
  • Pump head
  • 30 cm pump hose Marprene
  • 30 cm pump hose silicone
  • 5 m suction hose PE
  • Tube connector PP
  • Sample bottle 250 ml, LDPE
  • Bottle cage
  • 2x rechargeable battery
  • Battery charger

bk.product.specifications.title

bk.product.general_material.label

PE
Polyethylene

bk.product.general_material.label

TPE
Marprene

bk.product.general_material.label

PE-LD
Low-density polyethylene (LDPE)

bk.product.general_material.label

PP
Polypropylene

bk.product.general_material.label

VMQ, MVQ, SI
Silicone

Limit values

Viskosität bis ca.:
500 mPa·s
Ansaughöhe ca.:
5 mWC

Dimensions

Länge:
452 mm
Breite:
383 mm
Höhe:
129 mm

Tubing length

Länge Schlauch:
5 m

Contents of collection container

Inhalt:
250 ml

Vacuum sampler

Probenahmeart:
Target point sample
Proben Material:
liquid
Besondere Eigenschaften Vakuum-Probenehmer:
Universal adapter/flexible sample container,Completely transportable in a case

bk.product.optional_accessories.tab_title

Wide neck bottle LDPE Wide neck bottle LDPE

Wide neck bottle LDPE

The large neck opening of the wide neck bottle facilitates filling, removal and emptying. The liquid-tight screw cap ensures safe transport and storage. LDPE bottles are easy to squeeze and comfortable to handle.
Wide neck bottle LDPE Wide neck bottle LDPE

Wide neck bottle LDPE

The large neck opening of the wide neck bottle facilitates filling, removal and emptying. The liquid-tight screw cap ensures safe transport and storage. LDPE bottles are easy to squeeze and comfortable to handle.
PE hose PE hose

PE hose

The PE hose is physiologically harmless, resistant to acids, alkalis, salts and a variety of solvents, pressure-resistant, flexible, impact-resistant, lightweight, pressure-resistant, deformation-resistant up to + 80°C.
PE hose PE hose

PE hose

The PE hose is physiologically harmless, resistant to acids, alkalis, salts and a variety of solvents, pressure-resistant, flexible, impact-resistant, lightweight, pressure-resistant, deformation-resistant up to + 80°C.
Vampire pump tube made of marprene Vampire pump tube made of marprene

Vampire pump tube made of marprene

The Marprene pump tube is an accessory for the Vampir sample collector. It can be easily replaced after wear or instead of cleaning.
Vampire bottle basket

Vampire bottle basket

The bottle basket is an accessory for the Vampir sample collector. Sample bottles of 250 ml (Ø 68 mm), 500 ml (Ø 84 mm) or 1000 ml (Ø 100 mm) can be attached to the sampler in the bottle basket.

bk.product.similar_products.tab_title

ProfiSampler Aluminium ProfiSampler Aluminium

ProfiSampler Aluminium

ProfiSampler aluminum for solvents and flammable liquids in Explosion Categories IIA, IIB and IIC. With bottle thread GL 45 (suitable for Schott glass bottles 100 ml (3.38 oz.) to 1000 ml (33.81 oz.)).

When taking samples of flammable liquids, the device must be grounded. For this, grounding cable and, possibly in addition, anti-static set should be used, see accessories.
Profi Sampler PP Profi Sampler PP

Profi Sampler PP

ProfiSampler PP for general samples, for weak acids, alkalis, detergents, chemical baths. Made of solid, chemical resistant Polypopylene.
Sampler for liquid samples UniSampler "Ex" Sampler for liquid samples UniSampler "Ex"

Sampler for liquid samples UniSampler "Ex"

The sampler was specially developed for sampling flammable liquids of hazard class AI (VbF, e.g. petrol). The glass bottle and hose are electrically connected and earthed via an earth cable.
UniSampler sampler with lance UniSampler sampler with lance

UniSampler sampler with lance

The Bürkle UniSampler with lance is the ideal solution for precise, safe and flexible sampling of liquids in laboratories and industry. The sampler was developed to meet the highest standards of purity and user-friendliness.
UniSampler with hose UniSampler with hose

UniSampler with hose

UniSampler with PVC hose and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth.

 
MiniSampler PE MiniSampler PE

MiniSampler PE

PE MiniSampler for general sampling, max. suction height 5 m*

Ideal for general sampling from barrels, canisters, tanks etc.
MiniSampler PTFE MiniSampler PTFE

MiniSampler PTFE

PTFE MiniSampler for ultra-pure sampling, max. suction height 5 m (16.40 ft.).

Ideal when maximum purity is needed.