bk.product.specification-anchor-link.label

bk.product.packaging-unit.label

Piece

bk.product.warnings.headline

Caution! When handling flammable, highly flammable liquids, the explosion protection guidelines must be observed. All parts must be earthed, use anti-static set!

The pump is not suitable for acetone or similar drying solvents.

Detailed information

This stainless steel barrel pump has a flexible discharge hose with stopcock for maximum flexibility when filling liquids.

The 1.2 m (3.94 ft.) discharge hose directs the liquid directly into the desired container. This gives you the freedom to place the container where it is convenient for you, regardless of the position of the barrel pump.  The stopcock controls the flow of liquid, allowing precise dosing and preventing unwanted spills.

Stainless steel drum pumps are powerful and versatile piston pumps for transferring flammable or aggressive liquids and chemicals.

Their electrical conductivity makes the drum pumps ideal for highly flammable or combustible liquids. They have been specially developed for use in zones 0 and 1 (explosion groups II A and II B) and are DEKRA-tested. When used for flammable media, the pumps must be grounded.

The PTFE seals not only guarantee high chemical resistance, but also excellent sliding properties during the pumping process.

Stainless steel drum pumps are very flexible and versatile. They are ideally suited for a wide variety of drums, containers or other receptacles (approx. 60 to 1000 l capacity, up to 91 cm depth) and are thus true all-rounders in the workshop or production.

Compared to conventional solvent pumps for highly flammable liquids, our stainless steel drum pumps offer excellent value for money.

The durable and robust drum pumps made of high-quality, corrosion-resistant stainless steel (1.4301) guarantee a long service life, especially in humid or aggressive environments.

bk.product.scope_of_application.tab_headline

Stainless steel drum pumps are electrically conductive and resistant to a wide range of chemicals, enabling safe and efficient transfer or metering of liquids in the chemical, pharmaceutical or food industries.
bk.product.utilization.tab_headline
  1. Screw on the discharge hose.
  2. Insert the barrel pump with barrel screw connection (accessory) into the barrel and screw in hand-tight.
  3. Adjust the riser tube height if necessary.
  4. Hold the discharge hose in the filling container.
  5. Open the stopcock on the discharge hose.
  6. Operate the piston rod with the handle and fill the liquid.
  7. On the last pump stroke, push the piston rod into the pump as far as it will go.
  8. Close the stopcock on the discharge hose.
  9. Unscrew the discharge hose.
  10. Carefully unscrew the pump from the drum.
  11. Rinse the drum pump with pH-neutral liquid.
5601-0x01_fasspumpe_edelstahl_auslaufschlauch_gebrauchsanleitung.pdf 5601-0x01_fasspumpe_edelstahl_auslaufschlauch_gebrauchsanleitung.pdf
  • Stainless steel drum pump
  • Discharge hose & valve

bk.product.specifications.title

bk.product.general_material.label

1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304

bk.product.detail_material.label

PTFE
Polytetrafluoroethylene

Throughput

Förderleistung ca.:
190 ml/stroke
Förderleistung min. ca.:
9 l/min
Förderleistung max. ca.:
22 l/min

Ø

Tauchrohr-Ø:
32 mm

Pump outlet

Auslauf-Ø außen:
12.8 mm
Länge Auslaufschlauch:
1.2 m
Auslauftyp:
Discharge hose

Delivery tube

Eintauchtiefe:
36 cm

Limit values

Viskosität bis ca.:
500 mPa·s

Coloring

Farbe:
silver

Filling container

Eintauchtiefe justieren:
Immersion depth infinitely adjustable
Für Behälter bis:
approx. 30 liters

How to fill

Antriebsart:
manually operated
Pumpentyp:
Reciprocating pump
Besondere Eigenschaften Pumpen:
Exchangeable outlet elbow/hose

bk.product.mandatory_accessories.title

bk.product.mandatory_accessories.description

bk.product.mandatory_accessories.title

Anti-static set

When decanting flammable liquids without the machines and containers involved in the process being sufficiently earthed, electrostatic build-up can occur, which for many substances can result in fire or an explosion.

Bürkle’s Anti-static set ensures easy and reliable earthing.

The Anti-static set consists of three colour-coded connecting copper cables with clamps in a handy plastic case.

bk.product.mandatory_accessories.button_label

A variety of barrel fittings and threaded adapters, ensure the pump fits your application.

The discharge hose and discharge elbow are unscrewable and interchangeable.

Note that an anti-static kit is required if the pump is used for flammable media.

bk.product.optional_accessories.tab_title

Brass barrel screw joint Brass barrel screw joint

Brass barrel screw joint

Barrel screw joint made of nickel-plated brass for barrel pump stainless steel. Prevents electro-static charge in combination with the Anti-static set. For the safe transfer of flammable and easily flammable liquids. For containers with R 2" steel fine thread inside.

The container connectors make decanting even easier and safer with their more secure connection to barrels.
Discharge tube, single, thread G 3/4"

Discharge tube, single, thread G 3/4"

Fixed discharge tube for barrel pumps with G 3/4" connection thread, e.g. for AccuOne / EnergyOne barrel pumps.
Gastight barrel connector Gastight barrel connector

Gastight barrel connector

The gas tight barrel screw joint prevents hazardous gases from escaping from the barrel. G2" steel barrel thread, non-return valve with connection 1/8". Nickel-plated brass, seals made of FKM.

The container connectors make decanting even easier and safer with their more secure connection to barrels.
PP barrel screw joint

PP barrel screw joint

Barrel screw joint made of PP for secure connection in the barrel in three different thread models. For drawing off liquids that are not flammable.

The container connectors make decanting even easier and safer with their more secure connection to barrels. The connectors secure the pump in the barrel, enable a vertical position change and allow the required air exchange.
PVC barrel plug PVC barrel plug

PVC barrel plug

Barrel bungs made of PVC, consisting of two parts, therefore can be used for various openings with a diameter from 40–70 mm.
Universal thread adapter Universal thread adapter

Universal thread adapter

Universal thread adapter for nearly all drums and other containers with opening of 48–75 mm in diameter, regardless of the respective thread. The thread adapter can be mounted quickly and easily with clamping screws and can be used for different container openings.

With G2" connector thread for Bürkle drum screw connections and pumps with immersion tube diameter up to 32 mm.
Drain safety stand Drain safety stand

Drain safety stand

The draining safety stand safely collects residual liquid from pump tubing or samplers. The safety stand is resistant to dilute alkalis and acids. The unscrewable bottle allows for easy maintenance and cleaning.
Barrel holder Barrel holder

Barrel holder

The height-adjustable support surface of the drum holder provides space for placing the filling container directly under the outlet of the drum pump. This eliminates the risk of splashing fluid when filling from a great height, such as when the container is on the ground.
Universal drum wrench Universal drum wrench

Universal drum wrench

The universal barrel wrench made of galvanized steel effortlessly opens even tight barrel closures from 3/4" to 2". Robust and indestructible.

bk.product.similar_products.tab_title

Barrel pump stainless steel - discharge elbow Barrel pump stainless steel - discharge elbow

Barrel pump stainless steel - discharge elbow

The stainless steel barrel pump has a fixed discharge elbow for precise filling. Its conductivity makes it ideal for flammable liquids (DEKRA approved for Zone 0, 1, IIA, IIB). It offers high flexibility and a good price-performance ratio.
Solvent pump hand operated, for tin-foil canisters Solvent pump hand operated, for tin-foil canisters

Solvent pump hand operated, for tin-foil canisters

The solvent pump for tinplate canisters with pull-out spout puts an end to the risky decanting of dangerous substances into another container. The included thread adapter fits to the standard pull-out spouts - immediate safety!
Solvent pump hand operated Solvent pump hand operated

Solvent pump hand operated

Hand-operated solvent pump for contaminationfree removal of organic solvents and flavouring agents. The hand pump works according to the overpressure principle. An excess pressure is built up in the tank with the pump ball, forcing the liquid out of the container.

Pouring flammable liquids

All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE. The Bürkle anti-static set can be used to ground the pump for dispensing flammable liquids so that no electrostatic charge forms.

Gastight version

The pump can be completely closed off with the two ball valves so that no dangerous vapours can escape after dispensing.

Suitable for different containers

The hand pump is suitable for containers up to 60 litres.
Solvent pump foot operated - discharge tube Solvent pump foot operated - discharge tube

Solvent pump foot operated - discharge tube

Barrel pump for solvents with rigid discharge tube.
Solvent pump foot operated - discharge hose/stopcock Solvent pump foot operated - discharge hose/stopcock

Solvent pump foot operated - discharge hose/stopcock

Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE.
Mini solvent pump Mini solvent pump

Mini solvent pump

The Mini solvent pump dispenses and fills solvents and highly flammable liquids in small quantities precisely and safely. The high-quality hand pump is suitable for small containers such as bottles, canisters and containers up to approx. 10 liters.