Deutsch
English
français
español
русский
italiano
日本語
Ελληνικά
polski
português
Türkçe
中文
português (Brasil)
Solvent pump hand operated, for tin-foil canisters
- Medium-contacting parts made of stainless steel AISI 304 (1.4301) and PTFE
- Rigid discharge tube with stopcock made of stainless steel/PTFE
- Suitable for containers with G 2" thread
Packaging unit
Piece
Please note
Caution! When handling flammable, highly flammable liquids, the explosion protection guidelines must be observed. All parts must be earthed, use anti-static set!
Detailed information
The solvent pump for tinplate canisters with pull-out spout puts an end to the risky decanting of dangerous substances into another container. The included thread adapter fits to the standard pull-out spouts - immediate safety!
Hand-operated solvent pump for contaminationfree removal of organic solvents and flavouring agents. The hand pump works according to the overpressure principle. An excess pressure is built up in the tank with the pump ball, forcing the liquid out of the container.
Pouring flammable liquids
All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE. The Bürkle anti-static set can be used to ground the pump for dispensing flammable liquids so that no electrostatic charge forms.
Gastight version
The pump can be completely closed off with the two ball valves so that no dangerous vapours can escape after dispensing.
Suitable for different containers
The hand pump is suitable for containers up to 60 litres.
Typical application area of the product
Hand-operated solvent pump for contaminationfree removal of organic solvents and flavouring agents.
Material
- Solvent pump with fixed discharge elbow and stopcock
- Threaded adapter for tinplate canisters
Specifications
General material
1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304
Further materials
PTFE
Polytetrafluoroethylene
Connection
- Connection type:
- Thread
- Thread:
- 35 mm (double-threaded)
- Version:
- Internal thread
- Connection Ø:
- 35 mm (1.38 in)
Throughput
- Conveying capacity:
- 10 l/min
Limit values
- Viscosity up to:
- 500
Ø
- Pipe Ø:
- 15 mm (0.59 in)
- Immersion tube Ø:
- 15 mm (0.59 in)
Pump outlet
- Length of discharge tube:
- 185 mm (7.28 in)
- Outlet type:
- Discharge tube
- Outer outlet Ø:
- 12 mm (0.47 in)
Delivery tube
- Immersion depth max.:
- 60 cm
Filling container
- Adjusting the immersion depth:
- Immersion depth infinitely adjustable
- For containers up to:
- approx. 60 liters
How to fill
- Drive type:
- manually operated
- Pump type:
- Overpressure pump
You need
Thread adapter for commercially available containers available as accessory.
Similar products
Solvent pump hand operated
Hand-operated solvent pump for contaminationfree removal of organic solvents and flavouring agents. The hand pump works according to the overpressure principle. An excess pressure is built up in the tank with the pump ball, forcing the liquid out of the container.
Pouring flammable liquids
All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE. The Bürkle anti-static set can be used to ground the pump for dispensing flammable liquids so that no electrostatic charge forms.
Gastight version
The pump can be completely closed off with the two ball valves so that no dangerous vapours can escape after dispensing.
Suitable for different containers
The hand pump is suitable for containers up to 60 litres.
Dispensing system for solvents with discharge elbow
Withdrawal system for solvents with discharge hose
Mini solvent pump
Solvent pump foot operated - discharge tube
Barrel pump for solvents with rigid discharge tube.
Solvent pump foot operated - discharge hose/stopcock
Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE.